manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 231 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 231

4 135

Features of your vehicle

Automatic heating and air con-
ditioning

1. Press the AUTO button. The

modes, fan speeds, air intake and
air-conditioning will be controlled
automatically according to the
temperature setting.

2. Turn the temperature control knob

to the desired temperature.

✽

✽

NOTICE

• To turn the automatic operation

off, select any button or switch of
the following:
- Mode selection button
- Front windscreen defroster but-

ton (Press the button one more
time to deselect the front wind-
screen defroster function. The
'AUTO' sign will illuminate on
the information display once
again.)

- Fan speed control switch
The selected function will be con-
trolled manually whilst other func-
tions operate automatically.

• For your convenience and to

improve the effectiveness of the cli-
mate control, use the AUTO button
and set the temperature to 22°C/ 
71°F (23°C/73°F - Except Europe). 

OYDDCL2012

OYD046025L

■

Driver’s side

■

Passenger’s side

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments