manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 225 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 225

4 129

Features of your vehicle

Fan speed control

The ignition switch must be in the ON
position for fan operation.
The fan speed control knob allows
you to control the fan speed of the air
flowing from the ventilation system.
To change the fan speed, turn the
knob to the right for higher speed or
left for lower speed.
Setting the fan speed control knob to
the “0” position turns off the fan.

To turn off the blowers

To turn off the blowers, turn the fan
speed control knob to the “0” posi-
tion.

Air conditioning

Press the A/C button to turn the air
conditioning system on (indicator
light will illuminate). Press the button
again to turn the air conditioning sys-
tem off.

OYDDCL2009

OYDECL2032

OYD046023L

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments