manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 205 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 205

4 109

Features of your vehicle

High beam operation

To turn on the high beam headlights,
push the lever away from you. Pull it
back for low beams.
The high beam indicator will light
when the headlight high beams are
switched on.

To prevent the battery from being
discharged, do not leave the lights
on for a prolonged time whilst the
engine is not running.

OAM049044R-1

OBK049050

■

Type A

■

Type B

CAUTION

• Never place anything over the

sensor (1) located on the
instrument panel. This will
ensure better auto-light sys-
tem control.

• Don’t clean the sensor using a

window cleaner. The cleaner
may leave a light film which
could interfere with sensor
operation.

• If your vehicle has window tint

or other types of metallic coat-
ing on the front windscreen,
the Auto light system may not
work properly.

WARNING

Do not use high beam when
there are other vehicles. Using
high beam could obstruct the
other driver’s vision.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments