manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 198 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 198

Features of your vehicle

102

4

✽

✽

NOTICE

• The actual warning sound and indicator may differ from the illustration

according to objects or sensor status.

• Do not wash the vehicle's sensor with high pressure water. 

CAUTION

• This system can only sense

objects within the range and
location of the sensors;
It can not detect objects in
other areas where sensors are
not installed. Also, small or
slim objects, such as poles or
objects located between sen-
sors may not be detected by
the sensors.
Always visually check behind
the vehicle when backing up.

• Be sure to inform any drivers

of the vehicle that may be
unfamiliar with the system
regarding the systems capa-
bilities and limitations.

Type of warning indicator and sound

Distance 

from object 

Warning indicator

Warning sound

When driving 

forward

When driving 

rearward

4 Door,

5 Door

2 Door

4 Door,

5 Door

2 Door

100cm~61cm Front

-

-

Buzzer beeps

intermittently

120cm~61cm Rear

-

-

Buzzer beeps

intermittently

60cm~31cm

Front

Buzzer beeps 

frequently

Rear

-

-

Buzzer beeps 

frequently

30cm

Front

Buzzer sounds

continuously

Rear

-

-

Buzzer sounds

continuously

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments