manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 197 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 197

4 101

Features of your vehicle

Operation of the parking
assist system

Operating condition

• This system activates when the

parking assist system button is
pressed with the ignition switch ON.

• The indicator of the parking assist

system button turns on automati-
cally and activates the parking
assist system when you shift the
gear to the R (Reverse) position. It
will turn off automatically when you
drive above 20 km/h (12.4 mph).

• The sensing distance whilst mov-

ing forward is approximately 60 cm
(24 in.) when you are driving less
than 10 km/h (6.2 mph).

• When more than two objects are

sensed at the same time, the clos-
est one will be recognized first.

• If the vehicle speed is above

20km/h, the system automatically
turns off. To activate again, push
the button.

✽

✽

NOTICE

It may not operate if it’s distance
from the object is already less than
approximately 25 cm when the sys-
tem is ON.

OYD046258R

OYDECO2228R

■

Type A

■ 

Type B

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments