manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 195 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 195

4 99

Features of your vehicle

SPORT Mode Indicator
Light (if equipped)

This indicator light illuminates

• When you select "SPORT" mode

as drive mode.

For more details, refer to "Drive
Mode Integrated Control System" in
chapter 5.

ECO Mode Indicator
Light (if equipped)

This indicator light illuminates: 

• When you select “ECO” mode as

drive mode.

For more details, refer to “Drive
Mode Integrated Control System” in
chapter 5.

Glow Indicator Light
(Diesel Engine)

This indicator light illuminates:

• When the engine is being preheat-

ed with the ignition switch or
Engine Start/Stop Button in the ON
position.
- The engine can be started after

the glow indicator light goes off.

- The illumination time varies with

the engine coolant temperature,
air temperature, and battery con-
dition.

If the indicator light remains on or
blinks after the engine has warmed
up or whilst driving, there may a mal-
function with the engine preheating
system.
In this case, we recommend that you
have the vehicle inspected by an
authorised Kia dealer.

✽

✽

NOTICE - 

Engine Preheating

If the engine does not start within 10
seconds after the preheating is com-
pleted, set the ignition switch or
Engine Start/Stop Button to the
LOCK or OFF position for 10 sec-
onds and then to the ON position in
order to preheat the engine again.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments