manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 188 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 188

Features of your vehicle

92

4

This warning light remains on after
blinking for approximately 60 seconds
or repeats blinking and off at the
intervals of approximately 3 seconds:

• When there is a malfunction with

the TPMS.
In this case, have your vehicle
inspected by an authorised Kia
dealer as soon as possible.
For more details, refer to "Tyre
Pressure Monitoring System
(TPMS)" in chapter 6.

Door Ajar Warning Light
(if equipped)

This warning light illuminates:

When a door is not closed securely.

Trunk (tailgate) Open
Warning Light 
(if equipped)

This warning light illuminates:

When the trunk (tailgate) is not closed
securely.

WARNING - 

Safe Stopping

• The TPMS cannot alert you to

severe and sudden tyre dam-
age caused by external factors.

• If you notice any vehicle insta-

bility, immediately take your
foot off the accelerator pedal,
apply the brakes gradually with
light force, and slowly move to
a safe position off the road.

WARNING 

- Low tyre 

pressure

• Significantly low tyre pressure

makes the vehicle unstable
and can contribute to loss of
vehicle control and increased
braking distances.

• Continued driving or low pres-

sure tyres will cause the tyres
to overheat and fail.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments