manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 187 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 187

4 91

Features of your vehicle

Low Fuel Level Warning
Light

This warning light illuminates:

When the fuel tank is nearly empty.

If the fuel tank is nearly empty:

Add fuel as soon as possible.

Low Tyre  Pressure
Warning Light 
(if equipped)

This warning light illumi-
nates:

• Once you set the ignition switch or

Engine Start/Stop Button to the ON
position.
- It illuminates for approximately 3

seconds and then goes off.

• When one or more of your tyres

are significantly underinflated.
For more details, refer to "Tyre
Pressure Monitoring System
(TPMS)" in chapter 6.

CAUTION - 

Engine Oil

Pressure Warning Light

•

If the engine does not stop
immediately after the Engine
Oil Pressure Warning Light is
illuminated, severe damage
could result.

•

If the warning light stays on
whilst the engine is running, it
indicates that there may be
serious engine damage or
malfunction. In this case,
1. Stop the vehicle as soon as

it is safe to do so.

2. Turn off the engine and

check the oil level. If the oil
level is low, fill the engine
oil to the proper level.

3. Start the engine again. If the

warning light stays on after
the engine is started, turn
the engine off immediately.
In this case, we recommend
that you have the vehicle
inspected by an authorised
Kia dealer.

CAUTION - 

Low Fuel
Level

Driving with the Low Fuel Level
warning light on or with the fuel
level below “0 or E” can cause
the engine to misfire and dam-
age the catalytic converter (if
equipped).

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments