manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 186 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 186

Features of your vehicle

90

4

Charging System
Warning Light

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop Button to the ON
position.
- It remains on until the engine is

started.

• When there is a malfunction with

either the alternator or electrical
charging system.

If there is a malfunction with either the
alternator or electrical charging system:

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. Turn the engine off and check the

alternator drive belt for looseness
or breakage.

If the belt is adjusted properly,
there may be a problem in the
electrical charging system.
In this case, we recommend that
you have the vehicle inspected by
an authorised Kia dealer as soon
as possible.

Engine Oil Pressure
Warning Light

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop Button to the ON
position.
- It remains on until the engine is

started.

• When the engine oil pressure is

low.

If the engine oil pressure is low:

1.Drive carefully to the nearest safe

location and stop your vehicle.

2.Turn the engine off and check the

engine oil level (For more details,
refer to “Engine Oil” in section 7). If
the level is low, add oil as required.
If the warning light remains on after
adding oil or if oil is not available,
we recommend that you have the
vehicle inspected by an authorised
Kia dealer as soon as possible.

CAUTION - 

Petrol Engine

If the Malfunction Indicator
Lamp (MIL) illuminates, poten-
tial catalytic converter damage
is possible which could result in
loss of engine power.
In this case, we recommend that
you have the vehicle inspected
by an authorised Kia dealer as
soon as possible.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments