manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 182 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 182

Features of your vehicle

86

4

WARNING AND INDICATOR LIGHTS

Warning lights

✽

✽

NOTICE - 

Warning lights

Make sure that all warning lights
are OFF after starting the engine. If
any light is still ON, this indicates a
situation that needs attention.

Air bag Warning Light

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop Button to the ON
position.
- It illuminates for approximately 6

seconds and then goes off.

• When there is a malfunction with

the SRS.
In this case, we recommend that
you have the vehicle inspected by
an authorised Kia dealer.

Seat Belt Warning Light

This warning light informs the driver
that the seat belt is not fastened.

For more details, refer to the “Seat
Belts” in chapter 3.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments