Kia Cerato Owner'S Manual Download Page 180

Page: 180 / 655

Features of your vehicle

Press START button whilst turn steer-
ing (for smart key system)

• This warning message illuminates

if the steering wheel does not
unlock normally when the Engine
Start/Stop Button is pressed.

• It means that you should press the

Engine Start/Stop Button whilst
turning the steering wheel right
and left.

Steering wheel unlocked
(for smart key system)

• This warning message illuminates

if the steering wheel does not lock
when the Engine Start/Stop Button
changes to the OFF position.

Check Steering Wheel Lock System
(for smart key system)

• This warning message illuminates

if the steering wheel does not lock
normally when the Engine
Start/Stop Button changes to the
OFF position.

Press brake pedal to start engine
(for smart key system and automatic
transaxle / dual clutch transmission)

• This warning message illuminates

if the Engine Start/Stop Button
changes to the ACC position twice
by pressing the button repeatedly
without depressing the brake pedal.

• It means that you should depress

the brake pedal to start the engine.

Press clutch pedal to start engine (for
smart key system and manual transaxle)

• This warning message illuminates if

the Engine Start/Stop Button
changes to the ACC position twice
by pressing the button repeatedly
without depressing the clutch pedal.

• It means that you should depress

the clutch pedal to start the engine.

Key not in vehicle (for smart key system)

• This warning message illuminates

if the smart key is not in the vehicle
when you press the Engine
Start/Stop Button.

• It means that you should always

have the smart key with you.

Key not detected (for smart key system)

• This warning message illuminates

if the smart key is not detected
when you press the Engine
Start/Stop Button.

Press START button again
(for smart key system)

• This warning message illuminates

if you can not operate the Engine
Start/Stop Button when there is a
problem with the Engine Start/Stop
Button system.

• It means that you could start the

engine by pressing the Engine
Start/ Stop Button once more.

• If the warning illuminates each

time you press the Engine
Start/Stop Button, we recommend
that you have the vehicle inspected
by an authorised Kia dealer.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato

Reviews:

Kia Cerato, Owner'S Manual, Page: 180 / 655

Search results

Summary of Contents for Cerato

Reviews: