manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 171 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 171

4 75

Features of your vehicle

One time driving information mode

This display shows trip distance (1),
average fuel economy (2) and the
vehicle can be driven with the
remaining fuel (3).
This information is displayed for a
few seconds when you turn off the
engine and then goes off automati-
cally. The information provided is cal-
culated according to each trip.

If the estimated distance is below
1km (1mi.), the distance to empty (3)
will display as "---" and a refuel mes-
sage will appear (4).

LCD Modes (for Type B, Type C
instrument cluster)

(1) Trip Computer mode
This mode displays driving informa-
tion like the tripmeter, fuel economy,
and so on.
For more details, refer to “Trip
Computer” in this chapter.

(2) Turn By Turn mode (if equipped)
This mode displays the state of the
navigation.

OYD046304L

■

Type B

■ 

Type C

OYD046303L

OYD046310R

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments