manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 170 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 170

Features of your vehicle

74

4

Average Vehicle Speed (2)

• The average vehicle speed is cal-

culated by the total driving dis-
tance and driving time since the
last average vehicle speed reset.
- Speed range: 0 ~ 999 km/h or

MPH

• To reset the average vehicle speed,

press the RESET button (Type A :
RESET, Type B, C :

) on the

steering wheel for more than 1 sec-
ond when the average vehicle
speed is displayed.

✽

✽

NOTICE

• The average vehicle speed is not

displayed if the driving distance
has been less than 50 meters (0.03
miles) or the driving time has been
less than 10 seconds since the igni-
tion switch or Engine Start/Stop
button was turned to ON.

• Even if the vehicle is not in motion,

the average vehicle speed keeps
going whilst the engine is running.

Elapsed Time (3)

• The elapsed time is the total driv-

ing time since the last elapsed time
reset.
- Time range (hh:mm): 00:00 ~ 99:59

• To reset the elapsed time, press the

RESET button (Type A : RESET,
Type B, C :

) on the steering

wheel for more than 1 second when
the elapsed time is displayed.

✽

✽

NOTICE

Even if the vehicle is not in motion,
the elapsed time keeps going whilst
the engine is running.

Digital speedometer

This mode displays the current
speed of the vehicle.

OYD046293

■

Type B

■ 

Type C

OYD046297

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments