manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 151 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 151

4 55

Features of your vehicle

Electrochromic mirror (ECM) 
(if equipped)

The electric rearview mirror automat-
ically controls the glare from the
headlights of the vehicles behind you
in nighttime or low light driving condi-
tions. The sensor mounted in the mir-
ror senses the light level around the
vehicle, and automatically controls
the headlight glare from the vehicles
behind you.
When the engine is running, the glare
is automatically controlled by the sen-
sor mounted in the rearview mirror.
Whenever the shift lever is shifted
into reverse (R), the mirror will auto-
matically go to the brightest setting in
order to improve the drivers view
behind the vehicle.

To operate the electric rearview mir-
ror:

• The mirror defaults to the ON posi-

tion whenever the ignition switch is
turned on.

• Press the ON/OFF button (1) to

turn the automatic dimming func-
tion off. The mirror indicator light
will turn off.
Press the ON/OFF button (1) to
turn the automatic dimming func-
tion on. The mirror indicator light
will illuminate.

Outside rearview mirror

Be sure to adjust the mirror angles
before driving.
Your vehicle is equipped with both
left-hand and right-hand outside
rearview mirrors. The mirrors can be
adjusted remotely with the remote
switch. The mirror heads can be fold-
ed back to prevent damage during an
automatic car wash or when passing
through a narrow street.

WARNING - 

Rearview
mirrors

• The outside rearview mirror is

convex. Objects seen in the
mirror are closer than they
appear.

• Use your interior rearview

mirror or direct observation to
determine the actual distance
of following vehicles when
changing lanes.

OYD046316L

Indicator

Sensor

CAUTION

When cleaning the mirror, use a
paper towel or similar material
dampened with glass cleaner.
Do not spray glass cleaner
directly on the mirror. It may
cause the liquid cleaner to enter
the mirror housing.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments