manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 150 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 150

Features of your vehicle

54

4

Inside rearview mirror

Adjust the rearview mirror so that the
centre view through the rear window
is seen. Make this adjustment before
you start driving.

Day/night rearview mirror  

Make this adjustment before you
start driving and whilst the day/night
lever is in the day position.
Pull the day/night lever toward you to
reduce the glare from the headlights
of the vehicles behind you during
night driving.
Remember that you lose some
rearview clarity in the night position.

MIRRORS

WARNING - 

Rear visibility

Do not place objects in the rear
seat or cargo area which would
interfere with your vision
through the rear window.

OYDDCO2031

Day

Night

WARNING 

Do not adjust the rearview mir-
ror whilst the vehicle is moving.
This could result in loss of con-
trol, and an accident which
could cause death, serious
injury or property damage.

WARNING 

Do not modify the inside mirror
and don’t install a wide mirror. It
could result in injury, during an
accident or deployment of the
air bag.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments