manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 146 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 146

Features of your vehicle

50

4

Tilt and telescopic steering

Tilt and telescopic steering allows
you to adjust the steering wheel
before you drive. You can also raise it
to give your legs more room when
you exit and enter the vehicle.

The steering wheel should be posi-
tioned so that it is comfortable for
you to drive, whilst permitting you to
see the instrument panel warning
lights and gauges.

To change the steering wheel angle,
pull down the lock release lever (1),
adjust the steering wheel to the
desired angle (2) and height (3), then
pull up the lock-release lever to lock
(4) the steering wheel in place.
Be sure to adjust the steering wheel
to the desired position before driving.

Heated steering wheel 
(if equipped)

With the ignition switch in the ON
position, pressing the heated steer-
ing wheel button warms the steering
wheel. The indicator on the button
will illuminate and notify you on the
LCD window.
To turn the heated steering wheel off,
press the button once again. The
indicator on the button will turn off
and notify you on the LCD window.

WARNING

• Never adjust the angle of the

steering wheel whilst driving.
You may lose steering control
and cause severe personal
injury, death or accidents.

• After adjusting,

push the

steering wheel both up and
down to be certain it is locked
in position.

OYD046314R

OYD046009R

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments