Home
/
Kia
/
Cerato
/
Owner'S Manual

Kia Cerato, Owner'S Manual, Page: 142 / 655

Share

Page: 142 / 655

Kia Cerato Owner'S Manual Download Page 142

Features of your vehicle

46

4

Tilting the sunroof

To open the sunroof

Push the sunroof control lever
upward until the sunroof moves to
the desired position.

To close the sunroof

Pull the sunroof lever downward until
the sunroof moves to the desired
position.

OYDDCO2027

WARNING -

Sunroof

• Be careful that someone’s

head, hands and body are not
trapped by a closing sunroof.

• Do not extend face, neck,

arms or body outside through
the sunroof opening whilst
driving.

• Make sure hand and face are

safely out of the way before
closing a sunroof.

CAUTION

Objects less than
4mm(0.16inch) in diameter
caught between the sunroof
glass and the front glass chan-
nel may not be detected by the
automatic reverse glass and the
glass will not stop and reverse
direction.

«
...
140
141
142
143
144
...
»

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments