manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 140 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 140

Features of your vehicle

44

4

If your vehicle is equipped with a
sunroof, you can slide or tilt your
sunroof with the sunroof control
switch located on the overhead con-
sole.

The sunroof can only be opened,
closed, or tilted when the ignition
switch is in the ON position.

✽

✽

NOTICE

• In cold and wet climates, the sun-

roof may not work properly due to
freezing conditions.

• After washing the car or after

there is rain, be sure to wipe off
any water that is on the sunroof
before operating it.

✽

✽

NOTICE

The sunroof cannot slide when it is
in the tilt position nor can it be tilted
whilst in an open or slide position. 

SUNROOF (IF EQUIPPED)

OYDDCO2025

CAUTION

• Do not continue to move the

sunroof control lever after the
sunroof is in the fully open,
closed,

or tilt position.

Damage to the motor or sys-
tem components could occur.

• Make sure the sunroof is

closed fully when leaving your
vehicle. If the sunroof is open,
rain or snow may leak through
the sunroof and wet the interi-
or as well as cause theft.

WARNING 

Never adjust the sunroof or
sunshade whilst driving. This
could result in loss of control
and an accident that may cause
death, serious injury, or proper-
ty damage.

WARNING 

• In order to prevent accidental

operation of the sunroof, espe-
cially by a child, do not let a
child operate the sunroof.

• Do not sit on the top of the

vehicle. It may cause vehicle
damage.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments