manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 114 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 114

Features of your vehicle

18

4

Theft-alarm stage

The alarm will be activated if any of
the following occurs whilst the system
is armed.
• A front or rear door is opened without

using the transmitter (or smart key).

• The trunk is opened without using

the transmitter (or smart key).

• The engine bonnet is opened.
The hazard warning lights will blink
continuously for 27 seconds, unless
the system is disarmed. To turn off
the system, unlock the doors with the
transmitter (or smart key).

✽

✽

NOTICE

- Immobiliser system

• If the system is not disarmed with

the transmitter, insert the key into
the ignition switch and start the
engine. Then the system will be
disarmed.

• If you lose your keys, we recom-

mend that you consult an autho-
rised Kia dealer.

Opening the trunk (tailgate) with
the alarm armed (if equipped)

When the alarm is armed, the alarm
will not sound if the trunk lid (tailgate)
is opened with the transmitter (or the
smart key).
Once the trunk (tailgate) is opened
and then closed, the trunk (tailgate)
will be locked automatically and the
system will be armed again.
Also, if any of the doors or bonnet is
opened whilst the trunk lid (tailgate)
open and the alarm armed, the
alarm will sound.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments