manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 111 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 111

4 15

Features of your vehicle

Battery replacement

A smart key battery should last for
several years, but if the smart key is
not working properly, try replacing
the battery with a new one. If you are
unsure how to use or replace the
battery, we recommend that you con-
tact an authorised Kia dealer.

✽

✽

NOTICE

The circuit inside the smart key can
have a problem if exposed to mois-
ture or static electricity.

1. Open the rear cover of the smart

key.

2. Replace the battery with a new

battery (CR2032). When replacing
the battery, make sure the battery
position.

3. Install the battery in the reverse

order of removal.

✽

✽

NOTICE

• Using the wrong battery can cause

the smart key to malfunction. Be
sure to use the correct battery.

• Circuits inside the smart key may

develop problems when dropped,
exposed to moisture or static elec-
tricity. 

• If you suspect that your smart key

might have sustained some dam-
age, or you feel your smart key is
not working correctly, we recom-
mend that you contact an autho-
rised Kia dealer.

OYDECO2006CN

CAUTION

An inappropriately disposed
battery can be harmful to the
environment and human health.
Dispose the battery according to
your local law(s) or regulation.

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments