manualshive.com logo in svg

Kia Cerato, Owner'S Manual, Page: 108 / 655

Share
Download
Kia Cerato Owner'S Manual Download Page 108

Features of your vehicle

12

4

With a smart key, you can lock or
unlock a door (and trunk or tailgate)
and even start the engine without
inserting the key.
The functions of the buttons on a
smart key are similar to the remote
keyless entry. (Refer to the “Remote
keyless entry” in this section.)

Smart key functions

Carrying the smart key, you may lock
and unlock the vehicle doors (and
trunk or tailgate). Also, you may start
the engine. Refer to the following, for
more details.

Locking 

Pressing the button of the front out-
side door handles with all doors (and
trunk or tailgate) closed and any door
unlocked, locks all the doors (and
trunk or tailgate). The hazard warning
lights will blink once to indicate that all
doors (and trunk or tailgate) are
locked. The button will only operate
when the smart key is within 0.7 m
(28 in.) from the outside door handle.
If you want to make sure that a door
has locked or not, you should check
the door lock button inside the vehicle
or pull the outside door handle.

SMART KEY (IF EQUIPPED)

OYDECO2007CN

OYDDCO2008

Summary of Contents for Cerato
















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments