manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 96 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 96

Features of your vehicle

12

4

Keys

contact an authorised Kia dealer/ser

-

vice partner.

僅 The smart key will not work if any of 

the following occurs:
- The smart key is close to a radio 

transmitter such as a radio station 
or an airport which can interfere 
with normal operation of the smart 
key.

- The smart key is near a mobile two-

way radio system or a mobile 
phone.

- Another vehicle's smart key is being 

operated close to your vehicle.

When the smart key does not work 
properly, open and close the door with 
the mechanical key. If you have a prob

-

lem with the smart key, Kia recommends 
to contact an authorised Kia dealer/ser

-

vice partner.

CAUTION

Keep the smart key away from water or 
any liquid. If smart key is inoperative due 
to exposure to water or other liquids, it 
will not be covered by your manufac

-

turer’s vehicle warranty.

CAUTION

Changes or modifications not expressly 
approved by the party responsible for 
compliance could void the user’s author

-

ity to operate the equipment. If the key 
less entry system is inoperative due to 
changes or modifications not expressly 
approved by the party responsible for 
compliance, it will not be covered by 
your manufacturer’s vehicle warranty.

Theft-alarm system (if equipped)

Theft-alarm system is designed to pro

-

vide protection from unauthorised entry 
into the vehicle.
Vehicles equipped with a theft alarm 
system will have a label attached to the 
vehicle with the following words:
1. WARNING
2. SECURITY SYSTEM

This system is operated in three stages:
僅 Armed stage
僅 Theft-alarm stage
僅 Disarmed stage
If triggered, the system provides an 
audible alarm with blinking of the haz

-

ard warning lights.

Armed stage

Theft Alarm System goes to Armed 
stage after 30 seconds from the doors 
are locked by switch on a Outside Door 
Handle/by a lock button on the Key.

Using the smart key

Park the vehicle and stop the engine. 
Arm the system as described below.
1. Turn off the engine.
2. Make sure that all doors (and trunk/

tailgate) and the engine bonnet are 
closed and latched.

ODEEV068006NR

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments