manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 575 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 575

95

8

8

Maintenance

Light bulbs

Map lamp (Bulb type) bulb 
replacement

WARNING

Prior to working on the Interior lamps, 
ensure that the “OFF” button is 
depressed to avoid burning your fingers 
or receiving an electric shock.

1. Using a flat-blade screwdriver, gently 

pry the lens cover from lamp housing.

2. Remove the bulb by pulling it straight 

out.

3. Install a new bulb in the socket.
4. Align the lens cover tabs with the 

lamp housing notches and snap the 
lens into place.

CAUTION

Be careful not to dirty or damage the 
lens, lens tab, and plastic housings. 
Allow the bulb to cool down before han

-

dling it.

Map lamp (LED type) bulb 
replacement

If the map lamp (LED) (1), does not oper

-

ate, have your vehicle checked by a pro

-

fessional workshop.
Kia recommends to visit an authorised 
Kia dealer/service partner.
The LED lamps cannot be replaced as a 
single unit because it is an integrated 
unit. The LED lamps has to be replaced 
with the unit.
A skilled technician should check or 
repair the map lamp (LED), for it may 
damage related parts of the vehicle.

Room lamp (Bulb type) bulb 
replacement

OBD071056

OBD071057

ODEEV098066NR

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments