manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 566 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 566

Maintenance

86

8

Light bulbs

Headlamp (LED type) bulb 
replacement - Headlamp Type B

If the Low beam lamp (1), High beam 
lamp (2), Front turn signal lamp(3), Day 
time running lamp/Position lamp(4) 
does not operate, have your vehicle 
checked by a professional workshop.
Kia recommends to visit an authorised 
Kia dealer/service partner.
The LED lamps cannot be replaced as a 
single unit because it is an integrated 
unit. The LED lamps has to be replaced 
with the unit.
A skilled technician should check or 
repair the head lamp (LED), for it may 
damage related parts of the vehicle.

Front fog lamp (LED type) bulb 
replacement

If the front fog lamp (LED) (1), does not 
operate, have your vehicle checked by a 
professional workshop. Kia recommends 
to visit an authorised Kia dealer/service 
partner.The LED lamps cannot be 
replaced as a single unit because it is an 
integrated unit. The LED lamps has to be 
replaced with the unit.A skilled techni

-

cian should check or repair the front fog 
lamp (LED), for it may damage related 
parts of the vehicle.

Side repeater lamp (LED type) 
bulb Replacement

If the side repeater lamp (LED) (1) does 
not operate, have your vehicle checked 
by a professional workshop.
Kia recommends to visit an authorised 
Kia dealer/service partner.
The LED lamps cannot be replaced as a 
single unit because it is an integrated 
unit. The LED lamps has to be replaced 
with the unit.
A skilled technician should check or 
repair side repeater lamp (LED), for it 
may damage related parts of the vehicle.

OBD071210L

OBD071211

OBD071038R

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments