Kia Cerato 2022, Owner'S Manual, Page: 532 / 622

Maintenance
52 8
Battery
6. Turn ignition to the ON position and
wiper arms will return to the normal
operating position.
Rear window wiper blade
1. Raise the wiper arm and pull out the
wiper blade assembly(1).
2. Install the new blade assembly by
inserting the centre part into the slot
in the wiper arm until it clicks into
place.
3. Make sure the blade assembly is
installed firmly by trying to pull it
slightly. To prevent damage to the
wiper arms or other components,
have the wiper blade replaced by a
professional workshop. Kia recom
-
mends to visit an authorised Kia
dealer/service partner.
Battery
For best battery service
僅 Keep the battery securely mounted.
僅 Keep the battery top clean and dry.
僅 Keep the terminals and connections
clean, tight, and coated with petro
-
leum jelly or terminal grease.
僅 Rinse any spilled electrolyte from the
battery immediately with a solution of
water and baking soda.
僅 If the vehicle is not going to be used
for an extended time, disconnect the
battery cables.
NOTICE
Basically equipped battery is mainte
-
nance free type. If your vehicle is
equipped with the battery marked with
LOWER and UPPER on the side, you can
check the electrolyte level. The electro
-
lyte level should be between LOWER
and UPPER. If the electrolyte level is low,
it needs to add distilled (demineralized)
water (Never add sulfuric acid or other
electrolyte). When refill, be careful not to
splash the battery and adjacent compo
-
nents. And do not overfill the battery
cells. It can cause corrosion on other
parts. After then ensure that tighten the
cell caps. Contact a professional work
-
OBD071208R
OBD071207R
OBD071016R