Kia Cerato 2022 Owner'S Manual Download Page 528

Page: 528 / 622

Maintenance

Air cleaner

3. Replace the air cleaner filter.
4. Lock the cover with the cover attach

ing clips.

NOTICE

Insert the hinge(1) and engage the clips
when mounting the air cleaner cover.

Replace the filter according to the Main

tenance Schedule.
If the vehicle is operated in extremely
dusty or sandy areas, replace the ele

ment more often than the usual recom

mended intervals. (Refer to "Scheduled
maintenance service" on page 8-10.)

CAUTION

僅 Do not drive with the air cleaner

removed; this will result in excessive
engine wear.

僅 When removing the air cleaner filter,

be careful that dust or dirt does not
enter the air intake, or damage may
result.

僅 Use parts for replacement from a pro

fessional workshop. Kia recommends
to visit an authorised Kia dealer/ser

vice partner.

OBD071011

OBD078068

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2022

Reviews:

Kia Cerato 2022, Owner'S Manual, Page: 528 / 622

Search results

Summary of Contents for Cerato 2022

Reviews: