manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 525 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 525

45

8

8

Maintenance

Brake/clutch fluid

Brake/clutch fluid (if 
equipped)

Checking the brake/clutch fluid 
level

Check the fluid level in the reservoir 
periodically. The fluid level should be 
between MAX and MIN marks on the 
side of the reservoir.
Before removing the reservoir cap and 
adding brake/clutch fluid, clean the area 
around the reservoir cap thoroughly to 
prevent brake fluid contamination.
Periodically check that the fluid level in 
the brake fluid reservoir is between MIN 
and MAX. The level will fall with accumu

-

lated mileage. This is a normal condition 
associated with the wear of the brake 
linings.
If the fluid level is excessively low, have 
the system checked by a professional 
workshop. Kia recommends to visit an 
authorised Kia dealer/service partner.
Use only the specified brake fluid. (Refer 
to "Recommended lubricants and capac

-

ities" on page 9-10.)
Never mix different types of fluid.

WARNING

Loss of brake fluid

In the event the brake system requires 
frequent additions of fluid, have the sys

-

tem Inspected by a professional work

-

shop. Kia recommends to visit an 
authorised Kia dealer/service partner.

WARNING

Brake fluid

When changing and adding brake fluid, 
handle it carefully. Do not let it come in 
contact with your eyes. If brake fluid 
should come in contact with your eyes, 
immediately flush them with a large 
quantity of fresh tap water. Have your 
eyes examined by a doctor as soon as 
possible.

CAUTION

Do not allow brake fluid to contact the 
vehicle's body paint, as paint damage 
will result. Brake fluid, which has been 
exposed to open air for an extended 
time should never be used as its quality 
cannot be guaranteed. It should be 
properly disposed. Don't put in the 
wrong kind of fluid. A few drops of min

-

eral based oil, such as engine oil, in your 
brake system can damage brake system 
parts.

CAUTION

To maintain your vehicle`s best brake 
and ABS/ESC performance, use Kia gen

-

uine brake fluid or those of an equiva

-

lent standard brake fluid as in the 
specification. (Classification : SAE J1704 
DOT4 LV, ISO4925 CLASS-6, FMVSS116 
DOT-4)

OBD071007R

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments