manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 505 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 505

25

8

8

Maintenance

Scheduled maintenance service

Normal maintenance schedule - except Europe (Including Russia)

The following maintenance services must be performed to ensure good emission 
control and performance. Keep receipts for all vehicle emission services to protect 
your warranty. Where both mileage and time are shown, the frequency of service is 
determined by whichever occurs first.

NO.

ITEM

REMARK

* 1

Fuel additives (Petrol)

Kia recommends that you use unleaded petrol which has an 
octane rating of RON (Research Octane Number) 95 / AKI 
(Anti Knock Index) 91 or higher (for Europe) or Octane Rat

-

ing of RON (Research Octane Number) 91 / AKI (Anti-Knock 
Index) 87 or higher (except Europe).
For customers who do not use good quality petrols includ

-

ing fuel additives regularly, and have problems starting or 
the engine does not run smoothly, one bottle of additives 
should be added to the fuel tank when the engine oil is 
replaced. Additives are available from a professional work

-

shop along with information on how to use them. Kia recom

-

mends to visit an authorised Kia dealer/service partner. Do 
not mix other additives.

* 2

Engine oil and engine 

oil filter

As it is normal for engine oil to be consumed during driving, 
the engine oil level should be checked on regular basis.
The engine oil change interval for normal operating condi

-

tions is based on the use of the recommended engine spec

-

ification. If the recommended engine oil specification is not 
used, then replace the engine oil according to the mainte

-

nance schedule under severe operating conditions.

* 3

Coolant (Engine)

When adding coolant, use only deionized water or soft 
water for your vehicle and never mix hard water in the cool

-

ant filled at the factory. An improper coolant mixture can 
result in serious malfunction or engine damage.

* 4

Spark plug

For your convenience, it can be replaced prior to it's interval 
when you do maintenance of other items.

* 5

Drive belts (Engine)

僅 Adjust alternator, water pump and air conditioner drive 

belt. Inspect and if necessary repair or replace.

僅 Inspect drive belt tensioner, idler and alternator pulley 

and if necessary correct or replace.

* 6

Manual transmission 

fluid / Dual clutch 

transmission (DCT) 

fluid

Manual transmission fluid (or Dual clutch transmission 
(DCT) fluid) should be changed anytime it has been sub

-

merged in water.

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments