Kia Cerato 2022, Owner'S Manual, Page: 463 / 622

7
7
7
What to do in an emergency Tyre Pressure Monitoring System (TPMS)
Tyre Pressure Monitoring Sys
-
tem (TPMS) (if equipped)
Low tyre pressure telltale
TPMS SET button
System Overview
The tyre pressure monitoring system
(TPMS) senses change in radius of the
tyre. If the tyre pressure decreases
below the recommended pressure, the
system warning light will be illuminated.
For the system to function properly, it is
the driver’s responsibility to set the sys
-
tem by following accurate procedure
and set current tyre pressure.
The warning light will illuminate on the
cluster when one or more of your tyres is
under-inflated after the TPMS is set. The
warning light will also illuminate to warn
the driver of system malfunction. Please
refer to the above image (1) for further
information.
TPMS Setting
The driver can set the TPMS by following
procedures below:
1. Inflate all tyres to the recommended
pressure.
2. Start the engine, make sure the vehi
-
cle is not moving, and press the TPMS
switch (2) right side on the driver’s
seat for over 3 seconds.
3. Check if the ( ) warning indicator
blinks for 4 seconds.
4. Check if following message appears
on the cluster (if equipped).
* If the warning light does not blink or
the message does not pop up, per
-
form the process again from 2).
For recommended tyre pressure of this
vehicle, refer to "Tyres and wheels" on
page 9-8 or the tyre pressure label on
the driver’s door.
For proper function of the TPMS, the
driver must set the system in following
situations.
* Situation requiring TPMS setting
僅 If the tyre or wheel is repaired or
replaced
OBD061005R
OBD061022R
OBD071226R