manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 459 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 459

3

7

7

What to do in an emergency

If the engine will not start

4. When changing a flat tyre, follow the 

instruction provided later in this sec

-

tion.

If engine stalls whilst driving

1. Reduce your speed gradually, keep

-

ing a straight line. Move cautiously off 
the road to a safe place.

2. Turn on your emergency flashers.
3. Try to start the engine again. If your 

vehicle does not start, consult a pro

-

fessional workshop. Kia recommends 
to consult an authorised Kia dealer/
service partner.

If the engine will not start

If engine doesn't turn over or 
turns over slowly

1. If your vehicle has automatic trans

-

mission/dual clutch transmission, be 
sure the shift lever is in N (Neutral) or 
P (Park) and the emergency brake is 
set.

2. Check the battery connections to be 

sure they are clean and tight.

3. Turn on the interior light. If the light 

dims or goes out when you operate 
the starter, the battery is discharged.

4. Check the starter connections to be 

sure they are securely tightened.

5. Do not push or pull the vehicle to start 

it. See instructions for "Jump starting".

WARNING

If the engine will not start, do not push or 
pull the vehicle to start it. This could 
result in a collision or cause other dam

-

age. In addition, push or pull starting 
may cause the catalytic converter to be 
overloaded and create a fire hazard.

If engine turns over normally but 
does not start

1. Check the fuel level.
2. With the ignition switch or ENGINE 

START/STOP button in the LOCK/OFF 
position, check all connectors at the 
ignition coils and spark plugs. Recon

-

nect any that may be disconnected or 
loose.

3. Check the fuel line in the engine com

-

partment.

4. If the engine still does not start, call a 

professional workshop. Kia recom

-

mends to call an authorised Kia 
dealer/service partner.

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments