manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 421 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 421

147

6

6

Driving your vehicle

Rear Cross-Traffic Collision-Avoidance Assist (RCCA)

appear (turns off after a certain time), 

and the 

 warning light will illuminate 

on the cluster. We recommend that you 
have your vehicle inspected by an 
authorised Kia dealer/service partner.

Rear Cross-Traffic Collision-
Avoidance Assist disabled

When the rear bumper around the rear 
corner radar or sensor is covered with 
foreign matters, such as snow or rain, or 
installing a trailer or carrier, it can reduce 
the detecting performance and tempo

-

rarily limit or disable Rear Cross-Traffic 
Safety system.
If this occurs, the 'Rear cross-traffic 
safety functions disabled. Radar 
blocked' warning message will appear 
on the cluster. It is not a malfunction.
The function will operate normally when 
such foreign matters or trailer, etc. is 
removed.
Always keep the rear view camera and 
rear ultrasonic sensors clean.
If the function does not operate normally 
after it is removed, We recommend that 
you have your vehicle inspected by an 
authorised Kia dealer/service partner.

WARNING

僅 Even though the warning message 

does not appear on the cluster, Rear 
Cross-Traffic Safety system may not 
properly operate.

僅 Rear Cross-Traffic Safety system may 

not properly operate in an area (e.g. 
open terrain), where any substance 
are not detected after turning ON the 
engine.

CAUTION

Turn off Rear Cross-Traffic Safety sys

-

tem to install a trailer, carrier, etc., and 
remove the trailer, carrier, etc. to use 
Rear Cross-Traffic Safety system.

Limitations of Rear Cross-Traffic 
Collision-Avoidance Assist

Rear Cross-Traffic Safety system may 
not operate normally, or the function 
may operate unexpectedly under the 
following circumstances:
僅 Departing from where trees or grass 

is overgrown

僅 Departing from where roads are wet
僅 Speed of the approaching vehicle is 

fast or slow

Braking control may not work, driver's 
attention is required in the following cir

-

cumstances:
僅 The vehicle severely vibrates whilst 

driving over a bumpy road, uneven 
road or concrete patch

僅 Driving on a slippery surface due to 

snow, water puddle, ice, etc.

僅 The tyre pressure is low or a tyre is 

damaged

僅 The brake is reworked

OMQ4050292R

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments