Kia Cerato 2022 Owner'S Manual Download Page 41 | Manualshive

Page: 41 / 622

Kia Cerato 2022 Owner'S Manual Download Page 41

19

3

3

Safety features of your vehicle

Seat belts

You can adjust the height of the shoul

-

der belt anchor to maximum comfort
and safety.
The height of the adjusting seat belt
should not be too close to your neck.
Otherwise, you will not be getting the
most effective protection. The shoulder
portion should be adjusted so that it lies
across your chest and midway over your
shoulder near the door and not your
neck.
To adjust the height of the seat belt
anchor, lower or raise the height
adjuster into an appropriate position.
To raise the height adjuster, pull it up (1).
To lower it, push it down (3) whilst press

-

ing the height adjuster button (2).
Release the button to lock the anchor
into position. Try sliding the height
adjuster to make sure that it has locked
into position.
Improperly positioned seat belts can
cause serious injuries in an accident.

WARNING

僅 Verify the shoulder belt anchor is

locked into position at the appropriate
height. Never position the shoulder
belt across your neck or face. Improp

-

erly positioned seat belts can cause
serious injuries in an accident.

僅 After a collision, the seat belt system

should be inspected to ensure it is
operating normally. Replace any belts
that are not functioning appropriately.

To fasten your seat belt:

To fasten your seat belt, pull it out of the
retractor and insert the metal tab (1) into
the buckle (2). There will be an audible
"click" when the tab locks into the
buckle.
The seat belt automatically adjusts to
the proper length only after the lap belt
portion is adjusted manually so that it
fits snugly around your hips. If you lean
forward in a slow, easy motion, the belt
will extend and let you move around. If
there is a sudden stop or impact, how

-

ever, the belt will lock into position. It will
also lock if you try to lean forward too
quickly.

NOTICE

If you are not able to pull out the seat
belt from the retractor, firmly pull the
belt out and release it. Then you will be
able to pull the belt out smoothly.

WARNING

You should place the lap belt portion as
low as possible and snugly across your
hips, not on your waist. If the lap belt is
located too high on your waist, it may
increase the chance of injury in the
event of a collision. Both arms should
not be under or over the belt. Rather,

ODEEV058025NR

«
...
39
40
41
42
43
...
»

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments