manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 406 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 406

Driving your vehicle

132

6

Lane Following Assist (LFA)

ume' from the 'User settings (LCD dis

-

play) or Setup → Vehicle (Infotainment 
System screen)' menu to change the 
Warning Volume to 'High', ‘Medium’, 
‘Low’ or 'Off' (if equipped)’ for Hands-off 
warning.However, even if ‘Off’ is 
selected, the Hands-off Warning volume 
will not turn off but the volume will 
sound as ‘Low’.
If you change the Warning volume, the 
Warning volume of other Driver Assis

-

tance functions may change.

NOTICE

If your vehicle is equipped with addi

-

tional Infotainment System, please scan 
the QR code in a separately supplied Car 
Infotainment System Quick Reference 
Guide.

Lane Following Assist operation

Warning and control

Lane Following Assist

If the vehicle ahead or both lane mark

-

ings are detected and your vehicle 
speed is below 180 km/h (110 mph), the 
green (

) indicator light will illuminate 

on the cluster, and the function will help 

the vehicle stay in lane by controlling the 
steering wheel.

CAUTION

When the steering wheel is not con

-

trolled, the green (

) indicator light will 

blink and change to white.

Hands-off warning

If the driver takes their hands off the 
steering wheel for several seconds, the 
'Keep hands on steering wheel' warning 
message will appear and an audible 
warning will sound in stages.
僅 First stage: Warning message
僅 Second stage: Warning message (red 

steering wheel) and audible warning

OMQ4PH050379L

OBD041236R

OMQ4040509R

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments