manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 395 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 395

121

6

6

Driving your vehicle

Smart Cruise Control (SCC)

僅 Your vehicle speed is within the oper

-

ating speed range
10~180 km/h (5~110 mph): when 
there is no vehicle in front
0~180 km/h (0~110 mph): when there 
is a vehicle in front

僅 ESC (Electronic Stability Control), TCS 

(Traction Control System) or ABS is on

僅 ESC (Electronic Stability Control), TCS 

(Traction Control System) or ABS is 
not controlling the vehicle

僅 Engine rpm is not in the red zone
僅 Forward Collision-Avoidance Assist 

brake control is not operating

NOTICE

When stopped behind another vehicle, 
the driver can turn on Smart Cruise Con

-

trol whilst the brake pedal is depressed.

Overtaking Acceleration Assist

Overtaking Acceleration Assist will oper

-

ate when the turn signal indicator is 
turned on to the left (left-hand drive) or 
turned on to the right (right-hand drive) 
whilst Smart Cruise Control is operating, 
and the following conditions are satis

-

fied:
僅 Your vehicle speed is above 60 km/h 

(40 mph)

僅 The hazard warning flasher is off
僅 A vehicle is detected in front of your 

vehicle

僅 Deceleration is not needed to main

-

tain distance with the vehicle in front

WARNING

僅 When the turn signal indicator is 

turned on to the left (left-hand drive) 
or turned on to the right (right-hand 
drive) whilst there is a vehicle ahead, 

the vehicle may accelerate temporar

-

ily. Pay attention to the road condi

-

tions at all times.

僅 Regardless of your countries driving 

direction, Overtaking Acceleration 
Assist will operate when the condi

-

tions are satisfied. When using the 
function in countries with different 
driving direction, always check the 
road conditions at all times.

Displaying operating status

Operating

Temporarily cancelled

You can see the status of the Smart 
Cruise Control operation in the Driving 

OKA4050136

OKA4050137

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments