Kia Cerato 2022, Owner'S Manual, Page: 392 / 622

Driving your vehicle
118 6
Smart Cruise Control (SCC)
NOTICE
僅 If your vehicle speed is between 0~30
km/h (0~20 mph) when you press the
Driving Assist button, the Smart
Cruise Control speed will be set to 30
km/h (20 mph).
僅 The symbol of the Driving Assist but
-
ton can be applied indifferent such as
or depending on the vehi
-
cle.
Setting Vehicle Distance
Each time the Vehicle Distance button is
pressed, the Vehicle Distance changes
as follows:
NOTICE
僅 If you drive at 90 km/h (56 mph), the
distance is maintained as follows:
- Distance 4 - approximately 52.5 m
(172 ft.)
- Distance 3 - approximately 40 m
(130 ft.)
- Distance 2 - approximately 32.5 m
(106 ft.)
- Distance 1 - approximately 25 m (82
ft.)
僅 The distance is set to the last set dis
-
tance when the engine is restarted, or
when the function was temporarily
cancelled.
Increasing set speed
僅 Push up the + switch, and release it
immediately. The cruising speed will
increase by 1 km/h (1 mph) each time
the switch is operated in this manner.
僅 Push up the + switch, and hold it
whilst monitoring the set speed on the
cluster. The cruising speed will
increase by 10 km/h or 5 mph each
time the switch is operated in this
manner. Release the switch when the
desired speed is shown, and the vehi
-
cle will accelerate to that speed. You
can increase the set speed to 180 km/
h (110 mph).
WARNING
Check the driving condition before using
the + switch. Driving speed may sharply
increase when you push up and hold the
+ switch.
OBD051374
OBD051021