manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 389 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 389

115

6

6

Driving your vehicle

Cruise Control (CC)

Decreasing set speed

僅 Push the - switch down and release it 

immediately. The cruising speed will 
decrease by 1 km/h (1 mph) each time 
the switch is operated in this manner.

僅 Push the - switch down and hold it 

whilst monitoring the set speed on the 
cluster. The cruising speed will 
decrease to the nearest multiple of 
ten at first, and then decrease by 10 
km/h (5 mph) each time the switch is 
operated in this manner.
Release the switch at the speed you 
want to maintain.

Temporarily pausing Cruise Con

-

trol

Cruise Control will be paused when:
僅 Depressing the brake pedal.

僅 Pressing the 

 button.

僅 Shifting the gear to N (Neutral).
僅 Decreasing vehicle speed to less than 

approximately 30 km/h (20 mph).

僅 ESC (Electronic Stability Control) is 

operating.

僅 The vehicle speed is above 190 km/h 

(120 mph)

The set speed will turn off but the Cruise 
(

) indicator will stay on.

Resuming the function

Push the +, - switch or 

 button.

If you push the + switch up or - switch 
down, vehicle speed will be set to the 
current speed on the cluster.
If you press the 

 button, vehicle 

speed will resume to the preset speed.
Vehicle speed must be above 30 km/h 
(20 mph) for the function to resume.

Turning off Cruise Control

OBD051372

OBD051027

OBD051373

OBD051369

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments