manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 384 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 384

Driving your vehicle

110

6

Driver Attention Warning (DAW)

Inattentive driving

僅 The driver can monitor his/her driving 

conditions on the cluster.
- When the 'Swaying warning' is 

deselected from the settings menu, 
'System Off' is displayed.

- The function will operate when 

vehicle speed is between 0~210 
km/h (0~130 mph).

- When vehicle speed is not within 

the operating speed, the message 
'Standby' will be displayed.

僅 The driver's attention level is dis

-

played on the scale of 1 to 5. The 
lower the level is, the more inattentive 
the driver is.

僅 The level decreases when the driver 

does not take a break for a certain 
period of time.

Taking a break

僅 The 'Consider taking a break' mes

-

sage will appear on the cluster and an 
audible warning will sound to suggest 
that the driver take a break, when the 
driver's attention level is below 1.

僅 Driver Attention Warning will not sug

-

gest a break when the total driving 
time is shorter than 10 minutes or 10 
minutes has not passed after the last 
break was suggested.

WARNING

For your safety, change the settings 
after parking the vehicle at a safe loca

-

tion.

CAUTION

僅 Driver Attention Warning may suggest 

a break depending on the driver's 
driving pattern or habits, even if the 
driver doesn't feel fatigue.

僅 Driver Attention Warning is a supple

-

mental function and may not be able 
to determine whether the driver is 
inattentive.

僅 The driver who feels fatigued should 

take a break at a safe location, even 
though there is no break suggestion 
by Driver Attention Warning.

OBD041256R

OBD041241R

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments