manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 357 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 357

83

6

6

Driving your vehicle

Lane Keeping Assist (LKA)

Lane Departure Warning

Left

Right

僅 To warn the driver that the vehicle is 

departing from the projected lane in 
front, the green (

) indicator 

light will blink on the cluster, the lane 
line will blink on the cluster depending 
on which direction the vehicle is veer

-

ing, and an audible warning will 
sound. Also, the steering wheel will 
vibrate.

僅 The function will operate when your 

vehicle speed is between approxi

-

mately 60~200 km/h (40~120 mph).

Lane Keeping Assist

僅 To warn the driver that the vehicle is 

departing from the projected lane in 
front, the green (

)indicator 

light will blink on the cluster, and the 
steering wheel will make adjustments 
to keep vehicle inside the lane.

僅 The function will operate when your 

vehicle speed is between approxi

-

mately 60~200 km/h (40~120 mph).

Hands-off warning

If the driver takes their hands off the 
steering wheel for several seconds, the 
‘Keep hands on steering wheel’ warning 
message will appear on the cluster, and 
an audible warning will sound in stages.

WARNING

僅 The steering wheel may not be 

assisted if the steering wheel is held 
very tight or the steering wheel is 
steered over a certain degree.

僅 Lane Keeping Assist does not operate 

at all times. It is the responsibility of 
the driver to safely steer the vehicle 
and to maintain the vehicle in its lane.

僅 The hands–off warning message may 

appear late depending on road condi

-

tions. Always have your hands on the 
steering wheel whilst driving.

OBD041263

OBD041266

OBD041236R

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments