manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 315 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 315

41

6

6

Driving your vehicle

Brake system

there is a risk that the parking brake 
may freeze, apply it only temporarily 
whilst you put the shift lever in first or 
reverse gear (manual transmission) 
and block the rear wheels so the vehi

-

cle cannot roll. Then release the park

-

ing brake.

僅 Do not hold the vehicle on the 

upgrade with the accelerator pedal. 
This can cause the transmission to 
overheat. Always use the brake pedal 
or parking brake.

WARNING

僅 Never allow anyone who is unfamiliar 

with the vehicle to touch the parking 
brake. If the parking brake is released 
unintentionally, serious injury may 
occur.

僅 All vehicles should always have the 

parking brake fully engaged when 
parking to avoid inadvertent move

-

ment of the vehicle which can injure 
occupants or pedestrians.

Type A

Type B

Check the brake warning light by turn

-

ing the ignition switch or ENGINE 
START/STOP button ON (do not start 
the engine). This light will be illuminated 
when the parking brake is applied with 
the ignition switch or ENGINE START/
STOP button in the START or ON posi

-

tion.
Before driving, be sure the parking 
brake is fully released and the brake 
warning light is off.

If the brake warning light remains on 
after the parking brake is released whilst 
engine is running, there may be a mal

-

function in the brake system. Immediate 
attention is necessary.
If at all possible, cease driving the vehi

-

cle immediately. If that is not possible, 
use extreme caution whilst operating the 
vehicle and only continue to drive the 
vehicle until you can reach a safe loca

-

tion or repair shop.

Electronic Parking Brake (EPB) (if 
equipped)

Applying the parking brake

To apply the EPB (electronic 
parking brake) manually:

1. Stop the vehicle.
2. Depress the brake pedal and pull up 

the EPB switch. Make sure the warn

-

ing light comes on.

EPB may be automatically 
applied when:

僅 Requested by other systems.
僅 If the driver applies the EPB whilst the 

engine is ON then turn the engine off, 
the EPB may be applied again auto

-

matically.

W-75

OBD051378R

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments