Kia Cerato 2022, Owner'S Manual, Page: 251 / 622

15
5
5
Infotainment system Radio
FM/AM Mode (With RDS)
1. Current radio mode
2. Radio station information
3. Preset list
Press the [
MENU ] button on the control
panel to access the following menu
options:
僅
Traffic announcement : Activate or
deactivate traffic announcements.
Announcements and programmes will
be received automatically if available.
僅 Autostore : Save radio stations to the
preset list.
僅 Scan : The system searches for radio
stations with strong radio signals and
plays each option for about five
seconds.
僅 Sound settings : You can change the
settings related to sounds, such as
location where sound will be
concentrated and the output level for
each range.
-
Position : Select a location where
sound will be concentrated in the
vehicle. Select
Fade ( Fader ) or
Balance , turn the [ TUNE ] knob to
select the desired position, and
then press the knob. To set sound
to be centred in the vehicle, select
Centre .
- Equaliser ( Tone ): Adjust the output
level for each sound tone mode.
- Speed dependent vol. : Set the
volume to be adjusted
automatically according to your
driving speed.
NOTICE
僅 Depending on vehicle models or
specifications, available options may
vary.
僅 Depending on the system or amplifier
specifications applied to your vehicle,
available options may vary.
僅 Mode popup : Set to display mode
selection window when the [ RADIO ]
button is pressed on the control panel.
僅 Date/Time : You can change the date
and time that are shown on the
system display.
-
Set date : Set date to display on the
system display.
- Set time : Set time to display on the
system display.
- Time format : Select to display time
in the 12 hour format or the 24 hour
format.
- Display ( Power Off ): Set to display
the clock when the system power is
off.
僅 Language : You can change the
display language.
僅 Display off : Turn off the screen. Press
any of the control panel buttons to
turn back on.
DAB Mode (if equipped)
1. Current radio mode
2. Radio station information
3. Preset list
Press the [
MENU ] button on the control
panel to access the following menu
options: