Kia Cerato 2022, Owner'S Manual, Page: 250 / 622

Infotainment system
14 5
Radio
Radio
Turning on the radio
1. On the control panel, press the
[ RADIO ] button.
2. When the mode selection window dis
-
plays, turn the [ TUNE ] knob to select
the desired radio mode and then
press the knob.
FM/AM Mode
1. Current radio mode
2. Radio station information
3. Preset list
Press the [
MENU ] button on the control
panel to access the following menu
options:
僅
Autostore : Save radio stations to the
preset list.
僅 Scan : The system searches for radio
stations with strong radio signals and
plays each radio station for about five
seconds.
僅 Sound settings : You can change the
settings related to sounds, such as
location where sound will be
concentrated and the output level for
each range.
-
Position : Select a location where
sound will be concentrated in the
vehicle. Select
Fade ( Fader ) or
Balance , turn the [ TUNE ] knob to
select the desired position, and
then press the knob. To set sound
to be centred in the vehicle, select
Centre .
- Equaliser ( Tone ): Adjust the output
level for each sound tone mode.
- Sound experience : (if equipped)
select the location where sound is
focused in the vehicle between the
driver's seat and all other seats.
- Speed dependent vol. : Set the
volume to be adjusted
automatically according to your
driving speed.
NOTICE
僅 Depending on vehicle models or
specifications, available options may
vary.
僅 Depending on the system or amplifier
specifications applied to your vehicle,
available options may vary.
僅 Mode popup : Set to display mode
selection window when the [ RADIO ]
button is pressed on the control panel.
僅 Date/Time : You can change the date
and time that are shown on the
system display.
-
Set date : Set date to display on the
system display.
- Set time : Set time to display on the
system display.
- Time format : Select to display time
in the 12 hour format or the 24 hour
format.
- Display ( Power Off ): Set to display
the clock when the system power is
off.
僅 Language : You can change the
display language.
僅 Display off : Turn off the screen. Press
any of the control panel buttons to
turn back on.