Kia Cerato 2022 Owner'S Manual Download Page 249

Page: 249 / 622

Infotainment system

Audio (Without Touch Screen)

Numberless items

Turn the [

TUNE

] knob to select the

desired item, and then press the knob to
select the item.

Adjusting the settings

Turn the [

TUNE

] knob to adjust the

value, and then press the knob to save
changes.
Turn the [

TUNE

] knob to the right to

increase the value and turn the [

TUNE

]

knob to the left to decrease the value.

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2022

Reviews:

Kia Cerato 2022, Owner'S Manual, Page: 249 / 622

Search results

Summary of Contents for Cerato 2022

Reviews: