manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 226 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 226

Features of your vehicle

142

4

Interior features

Sliding armrest (if equipped)

To move forward

Grab the front portion of the armrest 
then press up the lever (1) and pull it for

-

ward.

To move rearward

Push the armrest rearward with your 
palm.

WARNING

Do not grab the front portion of the arm

-

rest (1) when moving the armrest rear

-

ward. It may pinch your fingers.

Seat warmer

The seat warmer is provided to warm 
the front seats during cold weather.

Front seat

Rear seat

With the ignition switch or ENGINE 
START/STOP button in the ON position:
僅 Push either of the buttons to warm 

the driver's seat or the front passen

-

ger's seat.

During mild weather or under conditions 
where the operation of the seat warmer 
is not needed, keep the levers/switch in 
the "OFF" position.

Temperature control (Manual)

僅 Each time you press the button, the 

temperature setting of the seat will 
change as follows:
- Front seat

OBD041549R

OBD041023R

OBD041024L

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments