manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 222 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 222

Features of your vehicle

138

4

Windscreen defrosting and defogging

Canceling/returning automatic 
defogging logic on manual cli

-

mate control system

1. Turn the vehicle to the ON position.

2. Select the (

) position.

3. whilst holding the air conditioning 

button (A/C) pressed, press the air 
intake control button at least 5 times 
within 3 seconds.
The indicator light in the air intake 
control button will blink 3 times. It 
indicates that the defogging logic is 
cancelled or returned to the pro

-

grammed status.

If the battery has been discharged or 
disconnected, it resets to the defog logic 
status.

Canceling/returning automatic 
defogging logic

1. Turn the vehicle to the ON position.

2. Press the defroster button (

).

3. whilst pressing the air conditioning (A/

C) button, press the air intake control 
button at least 5 times within 3 sec

-

onds.
The recirculation indicator blinks 3 
times in 0.5 second of intervals. It indi

-

cates that the defogging logic is can

-

celled or returned to the programmed 
status.

If the battery has been discharged or 
disconnected, it resets to the defog logic 
status.

OBD041327L

OBD041334L

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments