Kia Cerato 2022, Owner'S Manual, Page: 217 / 622

133
4
4
Features of your vehicle Windscreen defrosting and defogging
Windscreen defrosting and
defogging
When the windscreen is covered with
frost or moisture, the front view is
blurred, you should remove the frost
and moisture.
WARNING
Windscreen heating
Do not use the or position
during cooling operation in extremely
humid weather. The difference between
the temperature of the outside air and
the windscreen could cause the outer
surface of the windscreen to fog up,
causing loss of visibility. In this case, set
the mode selection to the position
and fan speed control to the lower
speed.
僅 For maximum defrosting, set the tem
-
perature control to the extreme right/
hot position and the fan speed control
to the highest speed.
僅 If warm air to the floor is desired
whilst defrosting or defogging, set the
mode to the floor-defrost position.
僅 Before driving, clear all snow and ice
from the windscreen, rear window,
outside rear view mirrors, and all side
windows.
僅 Clear all snow and ice from the bon
-
net and air inlet in the cowl grill to
improve heater and defroster effi
-
ciency and to reduce the probability
of fogging up the inside of the wind
-
screen.
Defogging inside windscreen
with manual climate control sys
-
tem
1. Select any fan speed except "0" posi
-
tion.
2. Select desired temperature.
3. Select the or position.
4. The outside (fresh) air and air condi
-
tioning will be selected automatically.
If the air conditioning and outside (fresh)
air position are not selected automati
-
cally, press the corresponding button
manually.
Defrosting outside windscreen
with manual climate control sys
-
tem
OBD041323L
OBD041324L