manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 216 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 216

Features of your vehicle

132

4

Automatic climate control system

tion selected will result in excessively dry 
air in the passenger compartment.

WARNING

僅 Continued climate control system 

operation in the recirculated air posi

-

tion may allow humidity to increase 
inside the vehicle which may fog the 
glass and obscure visibility.

僅 Do not sleep in a vehicle with the air 

conditioning or heating system on. It 
may cause serious harm or death due 
to a drop in the oxygen level and/or 
body temperature.

僅 Continued climate control system 

operation in the recirculated air posi

-

tion can cause drowsiness or sleepi

-

ness, and loss of vehicle control. Set 
the air intake control to the outside 
(fresh) air position as much as possi

-

ble whilst driving.

Controlling fan speed

The fan speed can be set to the desired 
speed by operating the fan speed con

-

trol button.
To change the fan speed:
僅 Press button right for higher speed, or 

press button left for lower speed.

To turn the fan speed control off:

僅 Press the OFF button.

Air conditioning (A/C)

僅 Press the A/C button to turn the air 

conditioning system on (indicator light 
will illuminate).

僅 Press the button again to turn the air 

conditioning system off.

Turning off the front air climate 
control

僅 Press the OFF button to turn off the 

air climate control system. However, 
you can still operate the mode and air 
intake buttons as long as the ignition 
switch or the ENGINE START/STOP 
Button is in the ON position.

OBD041319L

OBD041320R

OBD041322R

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments