manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 215 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 215

131

4

4

Features of your vehicle

Automatic climate control system

The passenger side temperature will 
be set to the same temperature as the 
driver side temperature.

2. Turn the driver side temperature con

-

trol knob. The driver and passenger 
side temperature will be adjusted 
equally.

3. When the third row’s seat heater but

-

ton is turned ON, the third row’s cli

-

mate and fan speed setting will 
automatically follow the first row set

-

tings.

Adjusting the driver and passen

-

ger side temperature individually

1. Press the “SYNC” button again to 

adjust the driver and passenger side 
temperature individually. The button 
indicator will turn off.

2. Operate the driver side temperature 

control knob to adjust the driver side 
temperature.

3. Operate the passenger side tempera

-

ture control knob to adjust the pas

-

senger side temperature.

Temperature conversion (°C 

↔ °F)

You can switch the temperature mode 
between Centigrade to Fahrenheit as 
follows; whilst pressing the OFF button, 
depress the AUTO button for 3 seconds 
or more. The display will change from 
Centigrade to Fahrenheit, or from Fahr

-

enheit to Centigrade.

Controlling air intake

This is used to select the outside (fresh) 
air position or recirculated air position.

To change the air intake control position:
僅 Push the desired control button.

Recirculated air position

With the recirculated air posi

-

tion selected, air from the passenger 
compartment will be drawn through the 
heating system and heated or cooled 
according to the function selected.

Outside (fresh) air position

With the outside (fresh) air 

position selected, air enters the vehicle 
from outside and is heated or cooled 
according to the function selected.

NOTICE

Prolonged operation of the heater in the 
recirculated air position (without air con

-

ditioning selected) may cause fogging of 
the windscreen and side windows and 
the air within the passenger compart

-

ment may become stale.
In addition, prolonged use of the air con

-

ditioning with the recirculated air posi

-

OBD041318L

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments