manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 205 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 205

121

4

4

Features of your vehicle

Manual climate control system

Heating and air conditioning

1. Start the engine.
2. Set the mode to the desired position.

For improving the effectiveness of heating and cooling;

僅 Heating: 

僅 Cooling: 

3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.

If air conditioning is desired, turn the air conditioning system on.

OBD041304R

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments