manualshive.com logo in svg

Kia Cerato 2022, Owner'S Manual, Page: 187 / 622

Share
Download
Kia Cerato 2022 Owner'S Manual Download Page 187

103

4

4

Features of your vehicle

Lighting

Type B

When the light switch is in the head light 
position, The head, tail, osition, license 
and instrument panel lights will turn ON.

NOTICE

The ignition switch or the ENGINE 
START/STOP Button must be in the ON 
position to turn on the headlights.

Auto light (if equipped)

Type A

Type B

When the light switch is in the AUTO 
light position, the taillights and head

-

lights will turn ON or OFF automatically 
depending on the amount of light out

-

side the vehicle.

CAUTION

僅 Never place anything over the sensor 

(1) located on the instrument panel as 
this will ensure better auto-light sys

-

tem control.

僅 Don't clean the sensor using a window 

cleaner, the cleaner may leave a light 
film which could interfere with sensor 
operation.

僅 If your vehicle has window tint or 

other types of metallic coating on the 
front windscreen, the Auto light sys

-

tem may not work properly.

OBD041627R

OBD041651L

OBD041057R

Summary of Contents for Cerato 2022















































































































































































































































































































































































































































































































































































































































Reviews:

No comments