Kia Cerato 2022, Owner'S Manual, Page: 184 / 622

Features of your vehicle
100 4
Lighting
僅 The following objects may not be rec
-
ognized by the sensor:
- Sharp or slim objects such as ropes,
chains or small poles.
- Undetectable objects smaller than
100 cm (40 in) and narrower than
14 cm (5.5 in) in diameter.
- Objects, which tend to absorb sen
-
sor frequency such as clothes,
spongy material or snow.
- People, animal or objects located
very close to the sensor
僅 The indicator may operate differently
when the people, animal or obstacle is
located between sensors.
僅 Parking Distance Warning may not
occur sequentially depending on vehi
-
cle speed or obstacle shape.
僅 Have the function be checked by an
authorised Kia dealer/service partner.
Lighting
This vehicle is equipped with a variety of
lights to illuminate the interior and exte
-
rior of the vehicle.
CAUTION
To prevent the battery from being dis
-
charged, do not leave the headlight and
interior light on for a prolonged time
whilst the engine is not running.
Battery saver function
The purpose of this feature is to prevent
the battery from being discharged if the
lights are left in the ON position. The
system automatically shuts off the park
-
ing lights after the engine is off and the
driver's door is opened.However, the
position lamps stay ON even when the
driver-side door is opened if the light
switch is operated after the engine is
turned off.If necessary, to keep the
lamps on turn the position lamps OFF
and ON again using the headlamp
switch on the steering column after the
engine is turned off.
Headlamp delay function (if
equipped)
If you place the ENGINE START/STOP
button in the ACC or OFF position with
the headlamps ON, the headlamps (and/
or position lamps) remain on for about 5
minutes. However, with the engine off if
the driver’s door is opened and closed,
the headlamps (and/or position lamps)
are turned off after 15 seconds.
The headlamps (and/or position lamps)
can be turned off by pressing the lock
button on the remote key or smart key
twice or turning the light switch to the
OFF or AUTO position. However, if you
turn the light switch to the AUTO posi
-